How to filter the Advanced Survey list
When your account builds up dozens of surveys, finding the right one by scrolling takes time. The Advanced Survey list now has a Filters panel with four sections, eight new filters, a group selector at the top of the page, and a button that resets everything. This guide walks through each control: what it does, where it is on the screen, which options it accepts, and the rule that keeps the result from surprising you.
If you don't know the screen yet, start with the article How to access the Advanced Survey module. To understand how a survey is targeted to a group, see How to create an Advanced Survey.
One rule applies to everything below: a filter does not delete surveys, it only hides rows from your screen. What exists in your list is defined by your permissions. Administrators and users with extended permissions see all surveys in the account. Users with more restricted access see only the surveys they are linked to.
In this article:
- The Filters panel and its four sections
- Search section: Creator, From and To
- The Status filter
- Survey configuration section
- Audience and access section
- Reports section
- The Clear filters button
- The group selector
- How filters combine
- What often causes confusion
- Why the Creator filter does not show everyone
- Real case: the committee agenda
- Frequently asked questions
The Filters panel and its four sections
The Filters panel is the column on the right of the list, next to the survey table. To get there: in the side menu, click the purple Advanced Survey icon and stay on the All Surveys tab.

Before, the panel showed twelve fields in one continuous list, with the dates at the end. Now they are grouped into four sections, in this order: Search, Survey configuration, Audience and access, and Reports. Each one has its own section below.
No filter is required: use one, several, or none.
Search section
This is the section that already existed, and it is the one that changed the most.
Creator
What it is: filters the list by the person who created the survey.
Where it is: first field of the Search section, at the top of the panel.
How it works: click the field, type part of the name, and choose the person.
The rule you need to know: the list of names offered inside the field depends on your profile, and it no longer shows the whole company to anyone who is not a full-account administrator. The Why the Creator filter does not show everyone section, further down, explains this in detail.
From and To
What they are: the date range.
Where they are: below the Creator field, stacked one on top of the other. This is on purpose: side by side, the date appeared cut off.
How they work: From brings everything from that date on, To brings everything up to that date, and both limit dates are included in the result. With From: 01/01 and To: 30/06, a survey that started on 30/06 shows up.
The rule you need to know: these fields used to be called Start Date and End Date and required the exact date, which made the filter seem not to work. Now they work as a range.
Watch the names. The table column headers are still Start Date and End Date. Only the panel labels changed to From and To.

The Status filter
What it is: filters by the survey's life stage.
Options: Draft, Scheduled, In Progress, and Finished. These are the four, and nothing changed in them.
Where it is: still in the Filters panel, with the same behavior as before.
Survey configuration section
Four new filters, all with multiple selection: you can check more than one option in the same field.
- Period: how often the survey repeats: Single Shot, Weekly, Biweekly, Monthly, and Shot by Journey.
- Privacy: how identified the respondent is: Anonymous, Semi-Anonymous, and Identifiable. Each level has its own article, starting with Advanced Survey - Privacy level: Anonymous.
- Languages: Portuguese, English, and Spanish. The same survey can be published in more than one language, so checking Portuguese and English brings the surveys that have Portuguese or English, not only the ones that have both.
- Sender: who signs the invitation that respondents receive: a Person or the Company. Note: a survey created before this field existed counts as Person, even though nobody chose that.

Audience and access section
Three new filters, each with a different behavior.
- Audience: multiple selection, two options: Internal audience (people in your company) and External audience (people from outside, such as candidates, clients, or former employees). An older survey, without this setting saved, counts as Internal audience.
- Individual response link: single selection, Yes or No. Clicking Yes unchecks No; clicking the checked option again unchecks it and removes the filter. An older survey counts as No.
- Send to the entire company: single selection, Yes or No, with the same click behavior. It shows whether the survey was sent to the whole company instead of a group.

Reports section
- Leadership has access: single selection, Yes or No. It reflects what is set on the survey's Report Access tab. It only tells you whether leadership has access to the results, not which leaders do.
The Clear filters button
Where it is: in the panel header, next to the Filters title. Always visible, even when no filter is checked.
What it does: clears all your choices at once, including the ones the platform had saved from your last visit. The filters stay clear after you reload the page.
Use this button whenever the result seems hard to explain: it is the fastest way back to the starting state.

The group selector
What it is: a field that limits the list to the surveys targeted to a group. In one click, it answers what used to require opening survey after survey: which ones went to the Sales team?
Where it is: it is not inside the Filters panel. It is at the top of the page, between the title and the row of tabs, aligned to the left. The field label is Select the group. Click it and choose a group; you can type part of the name.

How it works:
- One group at a time. It is single selection. Choosing another group replaces the previous one, it does not add to it.
- It can stay empty. With no group, the list shows all the surveys you have permission to see. This is the starting state of the screen, unlike the results screens, where the selector does not accept being left without a selection.
- To clear it, click the X in the field. Clearing really sticks: the field does not go back to any group on its own.
- It does not appear on the Templates tab. A survey template has no group associated with it.

Which groups you see: a full-account administrator sees all the groups in the company; a manager with restricted scope sees the ones they manage or follow as a follower. A group outside your scope does not appear as an option, and this does not change what you see with the field empty: the list keeps showing everything you already had access to.
Group hierarchy. Whoever creates the survey chooses the target group and decides whether to include its hierarchy, that is, whether the subgroups are included too:
- With hierarchy: the survey is found when you filter by the chosen group and also by any subgroup below it, at any depth (child, grandchild, and so on).
- Without hierarchy: the survey is found only when you filter by the exact group that was chosen.
- Filtering by the top group finds both cases.
Example: the company has Commercial, with Internal Sales and External Sales below it. "Commercial Pulse", targeted to Commercial with hierarchy, appears when you filter by Commercial, by Internal Sales, and by External Sales. "Internal Sales Onboarding", targeted to Internal Sales without hierarchy, appears only when you filter by Internal Sales, never by Commercial.
The selector and the Filters panel work together: Sales in the selector with Privacy: Anonymous in the panel brings the anonymous surveys of Sales.
How filters combine
Two rules explain any result the screen returns.
- Different filters add up (AND). Each checked filter narrows the result. Period: Weekly with Privacy: Anonymous brings only the surveys that are weekly and anonymous at the same time.
- Within the same filter, the options add up (OR). Checking more than one option in the same field widens the result. Weekly and Biweekly in Period brings the weekly surveys plus the biweekly ones.
Example with numbers: out of 40 surveys, Period: Weekly leaves 12; adding Privacy: Anonymous brings it down to 3 (AND); also checking Biweekly in Period raises it to 5 (OR). The group selector counts as one more AND.
What often causes confusion
Six situations that look wrong but are not.
1. Individual response link = Yes together with Audience = External audience never brings results. The screen shows "No results found" and it is right: this feature only exists in internal surveys, so the combination describes something that cannot exist. To see the surveys with an individual link, leave Audience with no selection or check Internal audience.
2. The survey sent to the entire company disappears when a group is selected. It has no target group saved, because it went to everyone, and the selector looks for surveys that point to a group. It did not disappear and it was not deleted: click the X in the Select the group field and it comes back.
3. An older survey shows up under options nobody set. Created before these fields existed, it has no saved value, and the platform assumes the default: Audience = Internal audience, Individual response link = No, and Sender = Person.
4. The Send to the entire company filter does not cover every external survey. A survey with External audience that does not have this field saved appears under neither Yes nor No when the filter is active. This is a known limitation. To review external surveys without leaving any out, filter by Audience: External audience without using the entire company filter at the same time.
5. The column headers are still Start Date and End Date. The panel calls the fields From and To, and the table calls the columns Start Date and End Date. It is the same information with two names: only the filter labels changed.
6. The group hierarchy depends on how the survey was set up. If a survey you expected to see in a subgroup does not appear, open its settings and check whether the hierarchy was included in the targeting, explained in the article How to create an Advanced Survey. Without hierarchy, only the exact group finds the survey.
Why the Creator filter does not show everyone
The most important guarantee: no survey stopped appearing in the list. Only the list of options in the search field changed. Every survey you saw yesterday, you still see today, including the ones created by people who are no longer in this list of names.
What changed. Before, any profile with access to the list saw all the people in the account in the Creator filter, even without a working relationship with them. Now, anyone who is not a full-account administrator sees the people who report directly to them.

Why it changed. The rest of the platform already works this way: in evaluations, PDPs, and engagement reports, you see what is within your management hierarchy, and Creator was the exception. You gain privacy, because anyone's name is no longer exposed in a search field to people who have no management relationship with them, and practicality, because in large accounts scrolling through hundreds of names helped no one.
Who is affected. Full-account administrator: nothing changes. All other profiles, including managers and administrators with restricted scope: the field shows their direct reports. If in doubt, open the field; if the list shows the whole company, you are a full-account administrator.
The case of a manager with no direct report registered. There is one situation where the Creator field appears with no people at all: you manage a group with people in it, but nobody is registered as your direct report. The rule looks at the direct leadership relationship, not at the groups you manage. The screen and your account are working as expected.
What to do: talk to whoever handles people records, usually HR or whoever administers the platform. The people on your team need to be registered as your direct reports, with you as their manager, and then the names appear in the filter. In the meantime, use the other filters: your list is still complete.
How to find the survey anyway. Creator is one way, not the only one:
- Type part of the title in the Search advanced survey field.
- Narrow the period in the From and To fields.
- Combine with Period, Privacy, or Audience in the Filters panel.
- Use the Select the group field, at the top of the page.
Real case: the committee agenda
Ana is a full-account administrator at a company with 48 surveys in the list. On Thursday she has the people committee and needs to bring two things: the anonymous surveys from the first half of the year targeted to Commercial, and the external surveys that are still open.
Step 1: open the screen. In the side menu, she clicks the purple Advanced Survey icon. The All Surveys tab opens with 48 rows and the Filters panel on the right.
Step 2: narrow it down to the half-year. In the Search section, she fills in From: 01/01 and To: 30/06. The list drops to 31.
Step 3: filter by privacy. In the Survey configuration section, she checks Privacy: Anonymous. 14 remain: the ones that are anonymous and from the first half of the year, because different filters add up.
Step 4: choose the group. At the top of the page, in the Select the group field, she types "Comm", chooses Commercial, and the list drops to 5.
Step 5: the surprise. The "Quarterly Climate Survey", which is anonymous, ran in March and the whole Commercial team responded, but it is not among the 5. Ana opens its settings and sees why: it was created with Send to the entire company, so it has no target group saved, and that is what the selector looks for.
Step 6: the fix. Ana clicks the X in the Select the group field and the list goes back to the 14 anonymous surveys of the half-year, with the "Quarterly Climate Survey" among them. On the agenda, she writes down the 5 from Commercial and adds the entire company one by hand, with a note that it covers Commercial too.
Step 7: the second question on the agenda. Now she wants the open external surveys. She clicks Clear filters, the 48 come back, and she checks Status: In Progress and Audience: External audience. 4 remain.
Step 8: the trap she avoids. Ana thinks about also checking Individual response link: Yes and decides against it: this feature only exists in internal surveys, so the screen would return "No results found".
Step 9: wrap up. Ana reviews the 4 external surveys and clicks Clear filters again: on her next visit, the panel will be reset.
Frequently asked questions
Did any survey disappear from my list?
No. The change in the Creator filter is only in the list of names in the field. The number of surveys you can see is the same.
Can I choose two groups at the same time?
No. The selector accepts one group at a time. To compare two, filter by one, write down the result, and switch.
I chose a group and the list came up empty. Is that wrong?
That group probably did not receive any targeted survey, or its surveys went to the entire company. Clear the selector with the X and check whether the surveys come back.
The group I am looking for is not on the list. Why?
The selector offers the groups within your management scope. Talk to whoever manages the account permissions. The list of permissions for the module is in the article Permission Keys for the Advanced Survey Module.
Can I ask to see more people in the Creator filter?
What widens the list is the management relationship in people records, or the full-account administrator profile.
I see a survey in the list, but the name of the person who created it does not appear in the filter. Is something wrong?
No. Seeing the survey and filtering by who created it are different things. The survey is still accessible, with the usual results and actions.
Are my filters saved when I leave the screen?
Yes, so you do not lose your selection as you navigate. To start from scratch, click Clear filters: they are cleared for good and stay clear after you reload the page.
Where do I see the period, the privacy, and the sender of each survey?
In the survey settings. The table still has the columns Title, Start Date, End Date, Next Survey, Status, and Actions: these attributes are for filtering and do not appear in the row.
Updated on: 12/11/2026
Thank you!
